Started the conversion with the Wheelman Designz Conversion kit:
http://www.davesmotors.com/WheelMan-Des ... kta-5.html
Setup will be as follows:
TMM 40063-3 for Cars X2-SERIES (ordered, being build)
ON/OFF switch
WP version (increased protection against water)
design with active FAN cooling (2 × FAN)
power conductors 10.0 mm2
set of external capacitors
MP JET 1.8mm (recommended for integrated AntiSpark)
connector 8.0mm (5x)
please solder these connectors to controller
Castle Creations 2028 800KV brushless motor.
2 X 9500MAH 75C 5S lipo
2 X 7600MAH 70C 4S lipo
Speed is not what I aim for, I just need to find the sweet spot with this setup.
Working on the Vekta is very straight forward and it has been the best RC vehicle I had to work with hands down. One of the things is though that they can be heavy on the loctite, but it worked out fine.
Installing the brushless setup is thanks to this kit incredibly easy, and it beasically removes the need for relatively heavy mods to get to brushless on the Vekta.5
Came back from the States yesterday morning and wanted to directly build this thing in. Who can blame a fanatic?
Updates will follow, need to wait 2 weeks for the ESC, but we are patient...
