Jag har några fina lipoaccar liggandes till ingen nytta. Om man använder sig av följande UBec:
1 Specification UBec
1.1 Output Voltage: 5V@3A or 6V@3A (Changeable with an output-voltage select switch ) 1.2 Continuous output current: 3 Amps 1.3 Input: 5.5V-26V (2-6 cells lithium battery pack or 5-18 cells NiMH /NiCd battery) 1.4 Size: 43mm*17mm*7mm (L*W*H) 1.7 Weight: 11g
2 Features
2.1 Designed with an advanced switch mode DC-DC regulator IC. 2.2 The output is powerful even working with 4 to 6 cells Lipo battery. 2.3 Battery polarity reversal protection. 2.4 A metal shield covers almost all the electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 The working status is shown by an indicator (LED), lights when the output is in normal range.
Detta borde väl funka bra ihop med min futaba fs603-mottagare och hitec jumboservo. Jag vet inte vad
ett 20kg:s servo kan dra i kortslutningsläget när dett gäller Ampere i och för sig.
Vad tror ni?
/Mikael.S
Lipo till mottagareacc?
- barchetta_98
- Posts: 251
- Joined: 26 Dec 2011, 23:54
- Phone Number: 0723226893
- Location: Herrljunga
Lipo till mottagareacc?
/Mikael.S
Cidercity Sweden
Gillar allt som brummar och luktar bensin.........!
BMW GT 535mm
Porsche GT 535mm
Futaba 4pks
Walkera V120d02s
Walkera Master CP
WLToys V911
WLToys V922
Cidercity Sweden
Gillar allt som brummar och luktar bensin.........!
BMW GT 535mm
Porsche GT 535mm
Futaba 4pks
Walkera V120d02s
Walkera Master CP
WLToys V911
WLToys V922
-
- Posts: 2067
- Joined: 01 May 2010, 11:29
- Phone Number: 0768033556
- Location: Söder om Sthlm på vischan
Re: Lipo till mottagareacc?
5 Amp är nog inget konstigt på ett jumboservo så den där verkar klen i mina ögon..
// Per slipsåkare som ibland fuskar i offroadträsket.
Who is online
Users browsing this forum: No registered users and 8 guests